ActronAir LM-RS-2G Wall mounted Remote Sensor – Grey (Senses Room Temperature)

Auto-Restart After Power Failure
Should a power failure occur whilst the air conditioner is running, the wall controller will restart the air conditioner in the same mode when the power is restored.

Dual Wall Control Operation (Optional)
Two wall controls can be installed on one system. This is particularly useful on two storey houses, where you can have one controller upstairs and one controller downstairs or having the second wall controller in the master bedroom, for improved temperature control.

Room Temp Display with One Touch
Simply press SELECT UP or DOWN arrow button and the set temperature display will change to show the room temperature for 3 seconds.

Note: When zones are fitted, the temperature displayed will depend on which sensor has been selected by the wall controller.

Integrated Zoning (Optional)
The integrated zoning system has a unique feature where it can select which remote temperature sensor to use depending on which zones are selected. One example is on a two-storey house and you only have the downstairs zone on, the zone control will select the downstairs sensor to control the temperature, thus ensuring perfect comfort in the area occupied.

Auto Defrost Function (Heating Mode)
At certain outdoor conditions (low temperature) there may be a build up of frost on the outdoor heat exchanger. This gradual build up of frost reduces the performance of the air conditioner. The microprocessor detects this frost build up and will automatically activate the defrost mode.

The defrost mode is displayed on the wall controller by flashing the “HEAT” symbol every 10 seconds.

Hot Start Function (Heating Mode)
When the air conditioner starts in heating mode, the indoor fan is delayed for a short period of time, this allows the heat exchanger to warm up before the air flow starts, thus preventing cold drafts. The hot start feature also activates itself when the system finishes defrosting.

Filter Clean Light
The microprocessor monitors the accumulated run time of the air conditioner and after a preset number of hours has passed, the “FILTER” light will flash, indicating it’s time to check if filter needs cleaning.

 Self Diagnosis
In the unlikely event that a fault develops with the air conditioner the microprocessor will diagnose the fault (where possible) and display a fault code on the wall controller