|Rated Capacity||Cool (kW)||7.1|
|Capacity Range||Cool (kW)||3.2-8.0|
|Power Input (Rated)||Cool (kW)||2.20|
|TCSPF (Residential)||Hot/Average/ Cold||4.44/3.92/4.00|
|HSPF (Residential)||Hot/Average/ Cold||4.17/3.90/3.55|
|Airflow Rate (Nominal/Max)||l/s||425/566|
|Indoor Sound Level (H) @ 1.5m||dBA (C/H)||37.3/40.5|
|Indoor Fan Speeds||H/M/L|
|Dimensions (HxWxD)||Indoor (mm)||300x1210x900|
|Power Supply||V/Hz||3 Phase, 380-415V, 50Hz|
|Compressor Type||Hermetically Sealed Swing Type|
|Pipe Sizes||Liquid (mm)||9.5 (Flare)|
|Gas (mm)||15.9 (Flare)|
|Drain (mm)||ID 25/OD 32|
|Supply Air Opening||mm (HxW, Flange)||185×852|
|Return Air Opening||mm||1×400 (Oval)|
|Outdoor Operating Range||Cool (°CDB)||-5 to 46|
|Heat (°CWB)||-15 to 16|
|EPA Sound Power Level||dBA||67|
|Outdoor Sound Level (H) @ 1m||Pressure dBA (C/H)||48/50|
DAIKIN FDYAN71A-CY 7.1kW Inverter Ducted System 3 Phase | BRC230Z8B Zone Controller
DAIKIN FDYAN71A-CY 7.1kW Inverter Ducted System | Back lit Controller | 3 Phase
Inverter Ducted Technology | R32 New Model
Indoor : FDYA71AV1
Outdoor : RZAS71CV1
Controller : BRC230Z8B Zone Controller
Improved Energy Efficiency
Achieved through the use of a DC Fan motor, cross-pass heat exchanger and increased outdoor coil passes.
Compact Indoor Unit
Low profile height of ≤360mm to fit comfortably into the tight roof space of a modern home.
Space Saving Outdoor Unit
Models up to 19.5kW are encased in a space saving side discharge outdoor unit allowing for flexible placement.
Night Quiet Mode
Reduces the outdoor noise levels during sleeping hours and automatically resumes normal operations in the morning.
R22 Retrofit Capability
Provides a cost effective and convenient upgrade from an existing R22 ducted system whilst retaining the field piping (5.0-15.5kW Models).
Indoor units are specifically designed and manufactured to Australian standards to withstand the harsher summer climate.
Zone Control, available on all ducted systems, allows you to group specified rooms within a particular “zone”.
This allows you to target within an established zone the specific rooms you want to heat or cool with your ducted system, rather than running your entire ducted system in the entire home or business.
Zoning can help maximise energy efficiency and comfort by specifically targeting heating and cooling.
For example, you may want to assign bedrooms to Zone One and the living areas to Zone Two etc., to thus enable these specific areas to be cooled or heated individually when needed.
FDYQN160LA-LV is the old model which has been replaced by FDYAN160A-CV [R32]
7.1 kW Cooling
7.5 kW Heating
Includes 8 Zone Controller | 240V